Planar 020-1229-03A Life Jacket User Manual


 
Planar UltraRes User Manual 9
Important Safety Instructions
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use any of the Planar UltraRes products near water.
6 Clean the LCD screens with an LCD screen cleaner or LCD wipes.
7 Do not install near any heat sources such as radiators, heat registers, stoves or
other apparatus (including amplifiers) that produce heat.
8 Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. When the provided plug does not fit
into your outlet, consult an electrician for the replacement of the obsolete
outlet.
9 Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles and the point where they exit from any of the Planar
UltraRes products.
10 Only use the attachments/accessories specified by the manufacturer.
11 Unplug all Planar UltraRes displays during lightning storms or when unused
for long periods of time.
12 You must follow all National Electrical Code regulations. In addition, be aware
of local codes and ordinances when installing your system.
13 Refer all servicing to qualified service personnel. Servicing is required when
any of the Planar UltraRes products have been damaged in any way, such as
the AC power cord or plug is damaged, liquid has been spilled or objects have
fallen into a product, the products have been exposed to rain or moisture, do
not operate normally or have been dropped.
14 Keep the packing material in case the equipment should ever need to be
shipped.
15 Wall mounts must be secure. The wall must be strong enough to hold the
UltraRes display, mounts and cables.
16 Slight pressure on the LCD will cause distortion of the image. Heavier pressure
will cause permanent damage. Planar UltraRes configurations should be
mounted where viewers cannot touch the screen or insert small objects in the
openings that will create hazards by contacting bare conductive parts.
Caution: The front polarizer is soft and subject to scratches from sharp objects.