Filter
Top Products
Supported UltraRes RS232 Commands
Planar UltraRes User Manual 109
Multiple Input 4 MI4 R/W No 0 2 No No
0 = Based on Input Source
1 = DisplayPort 4
2 = HDMI 4
Multiple Input Preset
Apply
PSA W No 0 7 No No Value = preset number
Multiple Input Preset
Save
PSS W No 0 7 No No Value = preset number
Power PWR R/W No 0 1 No No
0 = Off
1 = On
Splash Enable SPE R/W No 0 2 No No
0 = Off
1 = Landscape
2 = Portrait
Source Setup All SSA R/W No N/A N/A Yes No
String format = “aabbccddeeff”,
where:
“aa” is the Input Source value, in hex.
“bb” is the Input Mode value, in hex.
“cc” is the Multiple Input 1 setting, in
hex.
“dd” is the Multiple Input 2 setting, in
hex.
“ee” is the Multiple Input 3 setting, in
hex.
“ff” is the Multiple Input 4 setting, in
hex.
Status STA R No 0 4 No No
0 = Standby
1 = Powering Up
2 = On
3 = Powering Down
4 = Error
Standby Mode STB R/W No 1 0 No No
0 = Low Power
1 = Fast Startup
System Reset SYS W No N/A N/A No No
Action will be performed on any
setting value
Setting
Command Code
Read/Write
Inc/Dec
Min Value
Max Value
String?
Password
Protected?
Notes