Filter
Top Products
PowerLogic
TM
Series EM4000/EM4800 930-112-01-D.00
11/2013
4 ©2013 Schneider Electric All Rights Reserved
Normal Mode
In Normal mode, the Display button scrolls through the information for each meter.
The left and right arrow buttons select the previous or next meter points
respectively. The following information is available:
• Real Energy Delivered kWh D
• Real Energy Received kWh R
• Real Power Watts
• Reactive Energy Delivered kVarhD
• Reactive Energy Received kVarhR
• Reactive Power Var
• Peak Demand PeakW (Watts)
In Normal mode, the right and left arrow buttons scroll the display from meter points
1 to 8, 1 to 12, or 1 to 24, depending on your configuration.
Diagnostics Mode
Diagnostics mode is accessed by pressing and holding the Display button for 5
seconds. In Diagnostics mode, pressing the Display button will scroll through the
following information in addition to the Normal mode data:
• Send data command
• CT Primary value and Real Power (Watts) per phase
• Current (Amps) per phase
• Power Factor (pf) per phase
• Phase angle (Degrees) per phase
• Voltage per phase
• Local IP address
• Reset factory default IP address command
•Verify
• Badge #
• Date and time (UTC)
In Diagnostics mode, the right and left arrow buttons scroll the display from meter 1
through N. When the local IP address is shown on the LCD, use the right and left
arrow buttons to scroll through the following information:
• Remote host server IP address
• Time server IP address
• Default IP address
• Default NetMask
• Default gateway
• PPP user name
• Phone number
• AT command string
• Alternate phone number
• Unit serial number
• Firmware build number