Filter
Top Products
930-112-01-D.00 PowerLogic
TM
Series EM4000/EM4800
11/2013
©2013 Schneider Electric All Rights Reserved 17
Figure 11: BACnet tab in the Report section
Table 7: BACnet tab configuration parameters
Parameter Description
Device ID Set the BACnet device ID by entering a a numeric ID between 0 and
4194303.
Network Port The BACnet specific port number for this device (default is 47808).
BBMD Timeout Enter the amount of time (seconds) required for connection to a BACnet
network.
BBMD Address Enter the address of the BBMD device that controls all devices in the
BACnet network.
Description A user selectable description of the device (default is Power Meter)
Vendor ID BACnet Vendor Identification number (default is 10)
Vendor Name Schneider Electric (default)
Software Version The software version of the PowerLogic product (fixed).
UTC Offset Fixed at 0
Location A user selectable description of the physical location of the unit (default is
Unknown).
Object Name PowerHawk Meter (default)