Schneider Electric EM400 Marine Instruments User Manual


 
PowerLogic
TM
Series EM4000/EM4800 930-112-01-D.00
11/2013
16 ©2013 Schneider Electric All Rights Reserved
Figure 10: Calculations & Format tab in the Report section
Table 6: Calculations & Format tab configuration parameters
Parameter Description
Power Factor
Sign Format IEEE In the display, the sign (+ or -) indicates leading (+) or
lagging (-) power. The direction of active power is not
indicated.
IEC (default) In the display, the sign (+ or -) indicates the direction
of active power. Lead or lag indicates capacitive or
inductive power.
Method of Calculation Arithmetic Selects the arithmetic method for calculating Power
Factor.
Vector (default) Selects the vector method for calculating Power
Factor