Filter
Top Products
GX2360SPage 14
4.5 CHECKING GPS CONNECTIONS
After connections have been made between the QUANTUM and the GPS, a
small satellite icon will appear on the top right corner of the LCD display. To see
additional GPS information press and hold the
[
H/L
(
NAV
)]
key until the
QUANTUM shows the Date, Time, SOG and COG.
4.6 CHANGING THE GPS TIME
From the Factory the QUANTUM shows GPS satellite time or UTC time. A time
offset is needed to show the local time in your area.
1. Press and hold down the
[
CALL/SET
(
MENU
)]
key until “RADIO SETUP”
menu appears.
2. Press the
[
CALL/SET
(
MENU
)]
key, then select
“TIME SET” with the CHANNEL selector knob.
3. Press the
[
CALL/SET
(
MENU
)]
key.
4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your off-
set time from UTC. If “0:00” is assigned, the time is
the same as UTC (Universal Time Coordinated or
GMT Greenwich Mean Time).
5. Press the
[
CALL/SET
(
MENU
)]
key to store the time
offset.
6. Press the
[
16/9
]
key or turn the CHANNEL selector knob to select “EXIT,”
then press the
[
CALL/SET
(
MENU
)]
key to return to the “RADIO SETUP”
menu, select “EXIT” and press the
[
CALL/SET
(
MENU
)]
key to return to
radio operation.
OFFSET TIME TABLE