Filter
Top Products
Page 53GX2360S
8.6 VOICE SCRAMBLER
(Operates only when the optional CVS2500 is installed)
This menu is used to setup the channels to be scrambled and the scrambler
code.
NOTE
This menu will not appear unless a CVS2500 is installed.
1. Press and hold down the
[
CALL/SET
(
MENU
)]
key
until “RADIO SETUP” menu appears.
2. Press the
[
CALL/SET
(
MENU
)]
key then select
“SCRAMBLER” in the “RADIO SETUP” menu with
the CHANNEL selector knob.
3. Press the
[
CALL/SET
(
MENU
)]
key then select
“CODE” in the “SCRAMBLER” menu with the CHAN-
NEL selector knob.
4 Press the
[
CALL/SET
(
MENU
)]
key then turn the
CHANNEL selector knob to change the scrambler
code. The scrambler code can be set from “0” to “3”
and “OFF.” When “OFF” is selected the voice scram-
bler is disabled.
5. Press the
[
CALL/SET
(
MENU
)]
key to store the se-
lected code.
6. Select “CHANNEL” in the “SCRAMBLER” menu with
the CHANNEL selector knob, then press the
[
CALL/
SET
]
key.
7. Turn the CHANNEL selector knob to change the
Scrambler channel.
8. Press the
[
SCAN
]
key to store the selected chan-
nel. Repeat steps 6 and 7 to set other channels.
9. Press the
[
CALL/SET
(
MENU
)]
key to return to the “SCRAMBLER” menu.
10. To exit this menu and return to radio operation mode press the
[
16/9
]
key.