Filter
Top Products
GX2360SPage 30
6.18 PA/FOG OPERATION
PA/FOG mode allows the transceiver to be used as a 30W hailer when an
optional STANDARD HORIZON 220SW or 240SW PA horn speaker is installed.
When in Hail mode the PA speaker Listen’s Back (acts as a microphone and
sends sound to the front panel speaker) through the PA horn speaker which
provides two-way communications through the PA horn speaker.
NOTE
When in PA or FOG mode the QUANTUM will receive on the last se-
lected VHF channel before entering into the PA or FOG mode and re-
ceive DSC calls.
PA HAIL mode:
PA HAIL mode allows the transceiver to be used as a power hailer when an
optional STANDARD HORIZON 220SW or 240 SW HAIL/PA speaker is in-
stalled. The Hail mode has a listen-back feature which provides two way com-
munication through the HAIL/PA speaker.
FOG HORN mode:
Automatic signaling is transmitted through the HAIL/PA speaker.
6.18.1 Operating the PA HAIL mode
1. Press the
[
PA/FOG
]
key, then select “PA” with the
CHANNEL selector knob.
2. Press the
[
CALL/SET
(
MENU
)]
key.
3. Press the PTT switch to speak through the
HAIL/PA speaker.
Rotate the CHANNEL selector knob to control the
AF output level. The AF output level can be set from
0 to 30 watts.
4. To exit the PA HAIL mode, press the
[
16/9
]
,
[
WX
]
or
[
CALL/SET
(
MENU
)]
key.
6.18.2 Operating the FOG HORN mode
Operator can select from FOG 1, FOG 2, FOG 3, FOG 4, HORN, SIREN,
AGROUND, or ANCHOR.
FOG 1: POWER BOAT UNDERWAY
FOG 2: POWER BOAT STOPPED
FOG 3: SAIL BOAT, FISH VESSEL, TOW VESSEL
FOG 4: VESSEL UNDER TOW