Filter
Top Products
Page 55GX2360S
8.8 TRUE MAGNETIC CHANGE
(
NAV display
)
Allows customizing the GPS COG (Course Over Ground) displayed on the LCD
to be in True or Magnetic.
1. Press and hold down the
[
CALL/SET
(
MENU
)]
key
until “RADIO SETUP” menu appear.
2. Press the
[
CALL/SET
(
MENU
)]
key, then select
“TRUE MAG” in the “RADIO SETUP” menu with the
CHANNEL selector knob.
3. Press the
[
CALL/SET
(
MENU
)]
key.
4. Turn the CHANNEL selector knob to select “MAG-
NETIC” or “TRUE.”
5. Press the
[
CALL/SET
(
MENU
)]
key to store the se-
lected setting.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.
8.9 FOG ALERT TONE FREQUENCY
This selection allows you to select the Alert Tone Frequency for the PA/FOG
Operation. Available selections are “250 Hz” through “850 Hz” in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
1. Press and hold down the
[
CALL/SET
(
MENU
)]
key
until “RADIO SETUP” menu appear.
2. Press the
[
CALL/SET
(
MENU
)]
key, then select
“FOG FREQ.” in the “RADIO SETUP” menu with
the CHANNEL selector knob.
3. Press the
[
CALL/SET
(
MENU
)]
key.
4. Turn the CHANNEL selector knob to select desired
tone frequency.
5. Press the
[
CALL/SET
(
MENU
)]
key to store the se-
lected setting.
6. To exit this menu and return to radio operation mode
press the
[
16/9
]
key.