Filter
Top Products
GX2360SPage 22
CHANNEL SELECTOR KNOB
Rotary knob used to select channels and to choose menu items (such as the
DSC menu, radio setup and DSC setup menu). The
[
UP
(
)]
/
[
DOWN
(
)]
keys on the microphone can also be used to select channels and menu items.
Secondary Use
While holding down the [SCAN] key and turning the CHANNEL selector
knob, you can confirm memory channels for scanning.
Adjust the audio output level while in the PA/FOG mode.
ACCESSORY CONNECTION CABLE
Connects the QUANTUM to a GPS, a PA speaker, and an external speaker.
See section 3 OPTIONS for a list of speakers STANDARD HORIZON offers.
DC INPUT CABLE
Connects the radio to a DC power supply capable of delivering 12V DC.
RAM+ MIC CONNECTORS
Connects the QUANTUM to the enhanced RAM+ MIC (Remote Access
Microphone). Refer to section 9 ENHANCED RAM+ MIC OPERATION.
ANTENNA JACK
Connects an antenna to the transceiver. Use a marine VHF antenna with
an impedance of 50 ohms.
PTT (Push-To-Talk) SWITCH
Keys the transmitter when the transceiver is in radio mode. If the transceiver
is in the intercom operation mode (between the RAM+ and the QUANTUM),
it activates the QUANTUM microphone for voice communications.
MICROPHONE
Transmits the voice message with reduction of background noise, using
Clear Voice Noise Reduction Technology.
MICROPHONE SPEAKER
The same audio heard through internal radio speaker is heard through mi-
crophone speaker.
[
UP
(
)]
/
[
DOWN
(
)]
KEYS
The
[
UP
(
)]
and
[
DOWN
(
)]
on the microphone function the same as the
CHANNEL selector knob on the front panel of the transceiver.
[
16/9
]
Key
Pressing the
[
16/9
]
key immediately recalls channel 16 from any location.
Press and hold the
[
16/9
]
key to recall channel 9. Pressing the
[
16/9
]
key
again will revert the radio to the previous selected channel.