Filter
Top Products
1-4
SUPERSERVER 6025B-3/6025B-3R User's Manual
1-3 Server Chassis Features
The following is a general outline of the main features of the SC825TQ-560LP/
SC825TQ-R700LP server chassis.
System Power
The SC825TQ-560LP features a single 560W power supply. The system must be
shut down and the AC power cord removed before replacing or performing any
service on the power supply unit. The SC825TQ-R700LP features a redundant
700W power supply consisting of two power modules. The system does not need
to be shut down when replacing or removing a single power supply module.
SAS Subsystem
The SC825TQ-560LP/SC825TQ-R700LP chassis was designed to support eight
SAS hard drives, which are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the SAS drives.
Front Control Panel
The control panel on the SuperServer 6025B-3/6025B-3R provides you with system
monitoring and control. LEDs indicate system power, HDD activity, network activ-
ity, system overheat and power failure. A main power button and a system reset
button are also included. In addition, two USB ports have been incorporated into
the control panel to provide front side USB access.
I/O Backplane
The SC825TQ-560LP/SC825TQ-R700LP is an ATX form factor chassis designed for
use in a 2U rackmount confi guration. The I/O backplane provides seven low-profi le
PCI expansion slots, one COM port, a parallel port, a VGA port, two USB 2.0 ports,
PS/2 mouse and keyboard ports and two gigabit Ethernet ports.