Filter
Top Products
Chapter 5: Advanced Serverboard Setup
5-11
X7DB3 Quick Reference
Jumper Description Default Setting
J3P 3rd Power Fail Detect Open (Disabled)
JBT1 CMOS Clear (See Section 5-9)
JCF1 Compact Flash Master/Slave Select Closed (Master)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL1/ JPL2 JLAN1/JLAN2 Enable/Disable Pins 1-2 (Enabled)
JWD Watch Dog Pins 1-2 (Reset)
Connector Description
COM1/COM2 COM1/COM2 Serial Port Connector/Header
FAN 1-8 Fan Headers 1-8
IDE#1 IDE Hard Drive Connector
IDE#2 Compact Flash Card Connector
J7 BIOS Recovery
J22 Floppy Disk Drive Connector
JAR Alarm Reset
JD1 Power LED (pins1-3)/Speaker Header (pins 4-7)
JF1 Front Control Panel Connector
JK1 Keylock Header
JL1 Chassis Intrusion Header
JLAN1/2 Gigabit Ethernet Ports
JOH1 Overheat LED
JPW1 Primary 24-Pin ATX Power Connector
JPW2 Auxiliary Power Connector
JPW3 Processor Power Connector
JUSB2/JUSB3 Extra USB Headers (JUSB2/3 and JUSB4)
JWF1 Compact Flash Card Power Connector
JWOL Wake-on-LAN Header
JWOR Wake-on-Ring Header
PSF Power Supply Fail Header
Parallel Parallel (Printer) Port
SATA0-SATA5 Intel SATA Ports
SAS0~3, SAS4~7 SAS 0~3, SAS 4~7 Ports
SGPIO1/SGPIO2 SGPIO Headers
SIM IPMI (Slot 7) IPMI Connector
SMB System Management Bus Header
SMBUS System Management (I
2
C) Power Header
USB0/1 USB Ports