Filter
Top Products
7-6
SUPERSERVER 6025B-3/6025B-3R User's Manual
Parallel ATA
This setting allows the user to enable or disable the function of Parallel ATA. The
options are Disabled, Channel 0, Channel 1, and Both.
Serial ATA
This setting allows the user to enable or disable the function of Serial ATA. The
options are Disabled and Enabled.
Native Mode Operation
Select the native mode for ATA. The options are: Parallel ATA, Serial ATA, Both,
and Auto.
SATA Controller Mode
Select Compatible to allow the SATA and PATA drives to be automatically-detected
and be placed in the Legacy Mode by the BIOS. Select Enhanced to allow the SATA
and PATA drives to be to be automatically-detected and be placed in the Native
IDE Mode. Note: The Enhanced mode is supported by the Windows 2000 OS
or a later version.
When the SATA Controller Mode is set to "Enhanced", the following items will
display:
Serial ATA (SATA) RAID Enable
Select Enable to enable Serial ATA RAID Functions. (For a Windows OS environment,
use the RAID driver if this feature is set to Enabled. When this item is set to Enabled,
the item: "ICH RAID Code Base" will be available for you to select Intel fi rmware
to be activated. If this item is set to Disabled, the item-SATA AHCI Enable will be
available.) The options are Enabled and Disabled.
ICH RAID Code Base
Select Intel to enable Intel's SATA RAID fi rmware. The default setting is Intel.
SATA AHCI
Select Enable to enable the function of Serial ATA Advanced Host Interface. (Exercise
caution when using this function. This feature is for advanced programmers only.
The options are Enabled and Disabled.)