Filter
Top Products
2
INTRODUCTION
Thank you for purchasing the Selectronic Sine wave inverter, model SA41 with ENERGY
MANAGEMENT.
Your SA41 is a state-of-the-art high performance TRUE SINE WAVE DC to AC Power Inverter
incorporating ENERGY MANAGEMENT, a unique energy monitoring and controlling system
developed by Selectronic to enable you to maximise your limited energy resource.
Thousands of hours of development time have been invested in the SA41 to provide you with a
reliable, high quality product. The output from your SA41 is as good as, if not better than mains
power and if looked after properly, the SA41 will give you many years of reliable service.
WARRANTY CARD
Before proceeding any further, it is extremely important that you complete your warranty card
NOW. This will enable us to immediately register your initial 24 month warranty period, and also
make you eligible for our free lifetime warranty extension. Six months after the purchase date of the
SA41, Selectronic will send you a questionnaire. Simply complete and return the questionnaire to
us and we will extend your warranty, free of charge, for a lifetime. By accurately completing your
warranty card and questionnaire, you will provide us with valuable information that will assist us in
keeping up with your alternative energy needs. Please take a few moments to fill in the warranty
card. Your efforts will be greatly appreciated.
INSTALLATION
The installation of your inverter is
extremely important. Failure to
follow the recommended
installation instructions may void
your warranty. If in doubt, ask
your supplier.
After unpacking the SA41, check
for any damage which may have
occurred during transit. If there are
any signs of damage, contact your
supplier immediately.
The inverter must be installed in a
dry, cool, dust-free environment.
Please leave at least 300mm
clearance at the left and right hand
sides (Black heatsink fins),
300mm above the inverter and
approx. 200mm at the rear as this
will aid the natural cooling of the
inverter. The air vents on the
underside of the SA41 also need to
be kept clear of obstructions.
DC TO MAINS POWER PROUDLY DESIGNED & MADE IN AUSTRALIA
SELECTRONIC SINE WAVE INVERTER
300mm
WITH ENERGY MANAGEMENT SA41
200mm
300mm
300mm
Front