Filter
Top Products
20
APPENDIX I: DIAGNOSTICS
The "Diagnostics" is a special set of displays that give additional information about the SA41. These
are normally only used when advanced troubleshooting is undertaken. The "Diagnostics" section
displays the transformer and heatsink temperature, demand start current and software version
information.
"Diagnostics" is accessed by holding both UP and DOWN buttons together twice, for at least 1 second
each time, during the display of any "Readings" screen with the exception of "Status". The NEXT
DISPLAY key takes you through the "Diagnostics" displays, eventually returning to the "Readings"
display. See page 22 for more information.
TRANSFORMER TEMPERATURE
HEATSINK TEMPERATURE
DEMAND START CURRENT
SOFTWARE VERSION
TX Temp : 75C
* * Diagnostics * *
HS1 Temp : 34C
* * Diagnostics * *
HS2 Temp : 34C
* * Diagnostics * *
D/S Current : 48
* * Diagnostics * *
SELECTRONIC C
SA41 1.00 1996
This display is the operating temperature of the transformer inside the SA41
in degrees Celsius.
This displays the operating temperature of the left heatsink.
This displays the operating temperature of the right heatsink.
This gives a reading of the value read by the demand start sense circuit and
can be useful during advanced demand start troubleshooting.
This displays the revision of the software running your SA41.
Please note that this software is Copyright to SELECTRONIC
AUSTRALIA P/L and it is an offence to copy or duplicate any part of this
program. This is the last screen in the "Diagnostics" and pressing the NEXT
DISPLAY key once more will return you to the readings.