Toshiba Single-phase 100V class 0.1 to 0.75kW Marine Battery User Manual


 
E6581090
2
I
General operation
Warning
See item
Disassembly
prohibited
Never disassemble, modify or repair. This can result in electric shock, fire and injury. For
repairs, call your sales agency.
2.
Prohibited
Never remove the front cover when power is on or open door if enclosed in a cabinet. The
unit contains many high voltage parts and contact with them will result in electric shock.
Don't stick your fingers into openings such as cable wiring hole and cooling fan covers.
This can result in electric shock or other injury.
Don't place or insert any kind of object into the inverter (electrical wire cuttings, rods,
wires). This can result in electric shock or fire.
Do not allow water or any other fluid to come in contact with the inverter. This can result in
electric shock or fire.
2.1
2.
2.
2.
Mandatory
Turn power on only after attaching the front cover or closing door if enclosed in a cabinet.
If power is turned on without the front cover attached or closing door if enclosed in a
cabinet. This can result in electric shock or other injury.
If the inverter begins to emit smoke or an unusual odor, or unusual sounds, immediately
turn power off.
If the equipment is continued in operation in such a state, the result may be fire. Call your
local sales agency for repairs.
Always turn power off if the inverter is not used for long periods of time since there is a
possibility of malfunction caused by leaks, dust and other material.
If power is left on with the inverter in that state, it may result in fire.
2.1
3.
3.
Caution
See item
Prohibited
contact
Do not touch heat radiating fins. These devices are hot, and you'll get burned if you touch
them.
3.
Prohibited
Avoid operation in any location where there is direct spraying of the following solvents or
other chemicals. The plastic parts may be damaged to a certain degree depending on their
shape, and there is a possibility of the plastic covers coming off and the plastic units being
dropped.
If the chemical or solvent is anything other than those shown below, please contact us in
advance.
(Table 1) Examples of applicable chemicals and solvents
(Table 2) Examples of unapplicable chemicals and solvents
1.4.4
Chemical Solvent
Phenol Gasoline,
kerosene, light oil
Benzenesulfonic acid Turpentine oil
Benzol
Thinner
Chemical Solvent
Hydrochloric acid
(density of 10% or less)
Methanol
Sulfuric acid
(density of 10% or less)
Ethanol
Nitric acid
(density of 10% or less)
Triol
Caustic soda Mesopropanol
Ammonia Glycerin
Sodium chloride (salt)