Toshiba Single-phase 100V class 0.1 to 0.75kW Marine Battery User Manual


 
E6581090
H-1
8
8. Monitoring the operation status
8.1 Status monitor mode
In this mode, you can monitor the operation status of the inverter.
To display the operation status during normal operation:
Press the
key twice.
Setting procedure (eg. operation at 60Hz)
Item
displayed
Key
operated
LED
display
Communication
No.
Description

The operation frequency is displayed (during operation).
(When the standard monitor display selection parameter
 is set at 0 [operation frequency])
Parameter
setting
mode

The first basic parameter "History ()" is displayed.
Direction of
rotation
 FE01
The direction of rotation is displayed.
( : forward run, : reverse run)
Operation
frequency
command
 FE02 The operation frequency command value is displayed.
Load
current
 FE03
The inverter output current (load current) is displayed. (Default
setting : unit %)
Input
voltage
 FE04
The inverter input (DC) voltage is displayed.
(Default setting: unit %)
Output
voltage
 FE05
The inverter output voltage is displayed. (Default setting:
unit %)
To rqu e
current
 FE20 The torque current is displayed. (Default setting: unit %)
PI feedback
 FE22 The PI feedback value is displayed. (Unit: frequency)
Inverter
load factor
 FE27 The inverter load factor is displayed in %.
Output
power
 FE30 The inverter output power is displayed in %.
Operation
frequency
 FE00 The operation frequency is displayed.
Input
terminal
 FE06
The ON/OFF status of each of the control signal input terminals
(F, R, S1, S2 and VI/S3) is displayed in bits.
ON: 
OFF: 
Output
terminal
 FE07
The ON/OFF status of each of the control signal output
terminals (FM/OUT and FL) is displayed in bits.
ON: 
OFF: 
(Continued overleaf)
MON
MON
Note 1
MON
Note 2
Note 2,3
<
Input terminal
VI/S3
Input terminal S2
Input terminal F
Input terminal R
Input terminal
S1
Output terminal FL
Output terminal
FM/OUT

Note 2
Note 2