Uniden MHS126 Marine Radio User Manual


 
E-13
Uniden MHS126 Radio Owner’s Manual
You must have at least two channels in memory to start
a scan. However, you cannot save marine channel 70
or Weather channels.
You cannot transmit while in Scan mode.
To save a channel into memory, select the channel,
then press
MEM/SOS. The MEM icon displays whenever
you tune to that channel.
To remove a channel from memory, set the radio to
that channel, then press
MEM/SOS. The MEM icon no
longer displays.
When the radio stays on a channel, press
Channel Up to
leave that channel and resume scanning.
To end the scan, press the
SCAN/DUAL button again; the
radio remains on the last scanned channel.
Scan mode with Weather Alert Watch
If you activate Weather Alert Watch while in Scan mode,
the radio checks the most recently/used weather channel
every seven seconds, then continues scanning the next
channel in memory:
Scan mode with Triple Watch or Dual Watch
If you activate Triple Watch while operating in Scan mode,
the radio checks channels 16 and 9 every two seconds,
Every 7 seconds, the radio
checks the last-used
weather channel, then
scans the next channel.
wx
WX Alert
Watch on
Memory Channel Scan
08 252417151413121110 20