Filter
Top Products
E-25
Uniden MHS126 Radio Owner’s Manual
# Alkaline battery boost is limited to 2.5W
# Channels 75 and 76 are 1W only and do not have power
override capability.
1) Select the channel you want to transmit on.
2) Press
L/M/H to switch to the next transmission power
level (for example, from 1W to 2.5W; from 2.5W to 6W,
or from 6W back to 1W).
3) The display shows the new transmission power. The
transmit power remains at the new setting until you
change it again.
# Don’t forget to change the transmission setting back to
1W when you move close to other stations.
Some channels (for example, channels 13 and 67)
limit the transmission power to 1W. When you tune to a
limited-power channel, the radio automatically switches
to 1W. See page E-27 for a list of power-restricted
channels.
Saving Channels to Memory
If you nd a channel you like and want to listen to it again,
save it to memory. Press MEM/SOS; the active channel is
stored in memory and
MEM
displays. Press SCAN DUAL to
scan the channels in memory.
# You must have at least 2 channels in memory in order to
use Scan mode. Channel 70 and WX channels cannot be
stored into memory.
Press SCAN/DUAL again to remove the channel from
memory.