Filter
Top Products
17
How It Works
To remove a channel from memory, set the radio to that channel, then •
press and hold the SCAN-MEM button for two seconds. Memory will no
longer show on the display.
To activate scan mode, press the •
SCAN-MEM button. Press the SCAN-
MEM button again to return to the previous mode.
When the radio automatically stops on a channel, press the •
CHANNEL
UP button to leave that channel and resume scanning.
To end the scan, press the microphone •
PUSH TO TALK button or the
SCAN-MEM button. The radio remains on the last scanned channel.
Scan mode with Triple and Dual Watch
If you activate Triple Watch while
operating in scan mode, the radio
checks channels 16 and 9 every
two seconds, then goes on to
scan the next channel; with Dual
Watch turned on, the radio only
checks channel 16:
09 16
Every 2 seconds,
the radio checks
channels 9 & 16
then goes on to
the next channel.
with Triple Watch on
Memory Channel Scan
08 252417151413121110 20
Reversed 16 & 9
UJ-SW 20061215 #17
Press and hold the 16/9-TRI button (on
the radio or the microphone) for two
seconds to turn Triple/Dual Watch on or
off. (To change between Triple or Dual
Watch, see page 21.)
UM425 VHF OM.indd 17 28/9/11 11:55:16 AM