Filter
Top Products
39
Using Digital Selective Calling (DSC) Features
88
Unattended
1 Watt INT
Memory
DSC Standby
MENU
DSC Call
SELECT
Standby
SELECT
1. Display the menu and choose the DSC Call sub-menu.
2. Select Standby to place your radio in standby mode. The radio displays
the standby screen, above.
3. To cancel standby and return to the mode your radio was in, press any
button.
Disabling automatic channel switching
If you are involved in a bridge-to-bridge call, you may not want the radio to
automatically switch channels when it receives a DSC call. In cases like this,
you can disable automatic channel switching. If you receive an individual call,
the radio will respond with an unattended code, just as if the radio were in
Standby.
Press the 1.
MENU-PA button to display the menu.
Select 2. Setup and then Auto CH SW.
Highlight 3. Off and press the
SELECT button. The radio will not
automatically switch channels until you reactivate this feature.
NOTE: Use this feature with caution. Deactivating automatic switching and
then forgetting it can make it hard for you to receive DSC calls.
UM425 VHF OM.indd 39 28/9/11 11:55:19 AM