Filter
Top Products
Installing the Hardware
42
Position the radio into the desired location. Mark the edges of the 2.
bracket on the mounting surface.
Remove the mounting bracket drill template from the back of the 3.
manual, and use the template to mark the drill holes on the mounting
surface.
Drill the holes for the mounting bracket; be sure to follow any special 4.
requirements of the mounting surface.
Remove the bracket from the radio, and use the mounting hardware to 5.
secure the bracket to the mounting surface.
Hex bolt
Washer
Spring washer
Hex nut
Mounting
bracket
Mounting
surface
Install the radio back into the mounting bracket.6.
UM425 VHF OM.indd 42 28/9/11 11:55:20 AM