Filter
Top Products
21
Using Your Radio
NOTE: By default, when you change to channel 16, the radio automatically
boosts the power to 25 Watts. Be sure to change the power back to 1 Watt if
you are not making an emergency transmission.
Some channels limit the power of transmission to 1 Watt so that there is less
interference between boaters attempting to use the channel at the same
time. If you switch to one of these channels, the radio changes back to 1 Watt
automatically. See the channel list on page 57 for a list of power-restricted
channels.
Choosing Triple Watch or Dual Watch
In Triple Watch mode, the radio briey checks channels 16 and 9 every two
seconds. In Dual Watch mode, the radio checks channel 16 only. Generally,
Triple Watch is used in areas where channel 9 is used as a hailing frequency,
while Dual Watch is used in areas where channel 16 is used for distress and
hailing. Your radio comes set to use Triple Watch; if you want to use Dual
Watch instead, you will have to select it in the setup:
88
Dual Watch
Triple Watch
[Exit]
Dual/TriWatch
MENU
Setup
SELECT
Dual/TriWatch
SELECT
Press the 1. MENU-PA button to display the menu.
Select 2. Setup and then Dual/Tri Watch.
Highlight3. Dual Watch and press the
SELECT button. The radio
activates the new setting and returns to the Setup menu.
To reactive Triple Watch, repeat the procedure described above, but 4.
choose Triple Watch in step 3.
UM425 VHF OM.indd 21 28/9/11 11:55:16 AM