Filter
Top Products
47
Installing the Hardware
When the GPS receiver is correctly connected, the display shows GPS Data
OK. If there is a problem with the GPS connection, the display shows Check
GPS. When the display shows GPS Data OK, press the SELECT button to
open the GPS status screen and see detailed GPS data:
16
06/20 11:00:00
208
o
30. 0 KT
35
o
40. 610 N
139
o
46. 564 E
Date
Time
Current
channel
Course
Latitude
Longitude
Speed
Conguring the GPS
If the radio is receiving valid GPS data, it will automatically set the clock to
your local time based on the GPS location. You can adjust your local time
forward or back one hour if necessary (for example, if you are close to the
border of a time zone); you can also adjust for Daylight Savings Time.
Follow the steps below to adjust the time:
Display the menu and choose the 1. Setup sub-menu.
Select 2. GPS Setup and then choose Time Adjust.
The display shows your current local time. To adjust the time forward 3.
one hour, use the
CHANNEL UP button. To adjust the time back one hour,
use the CHANNEL DOWN button. Press the SELECT button when you are
nished.
The display prompts you to conrm the setting: choose 4. Set to save the
new time or Cancel to exit time setup without saving. The radio returns
to the GPS Setup menu.
If your local area observes Daylight Savings Time, highlight5. Daylight
Save and press the
SELECT button.
16
09 : 14
Time Adjust
Use the up or down
arrows to adjust the
time by one hour.
MENU
Setup
SELECT
GPS Setup
SELECT
Time Adjust
SELECT
UM425 VHF OM.indd 47 28/9/11 11:55:22 AM