Filter
Top Products
Installing the XM 1800
975-0263-01-01 3–9
Installing the XM 1800
Do not proceed with the installation of your XM 1800 until you have read
the section “Designing Your Installation” on page 3–1. The more
thorough your planning, the better your power needs will be met to
achieve maximum performance from your XM 1800.
Safety Instructions
Before you start to install the XM 1800:
• Review the “Important Safety Instructions” on page v.
• Do not attempt your own AC wiring unless you have the knowledge,
tools, and experience to do a safe job. Because installation requires
compliance with various codes, installers should be certified
technicians or electricians.
• Read and follow all Warnings and Cautions in this chapter.
Installation Tools and Materials
Tools • Wire stripper
• Wrench for DC terminals and ground stud
• Screwdrivers—1/8" slot-head and Phillips
• Crimping tool for fastening lugs and terminals on DC cables.
(You may find it more convenient to have the crimp connectors
installed onto the DC cable by the store that sells you the cable and/or
connectors.)
Important:
If you have any installation questions or issues, please contact
Customer Service. Contact information is available in “Warranty” on page WA–1.
Xantrex_PRO1800.book Page 9 Tuesday, April 24, 2007 11:33 AM