113
config router_ports
<portlist> − Specifies a port or range of ports that will be configured
as router ports.
Restrictions Only administrator-level users can issue this command.
Example usage:
To set up static router ports:
DES-3550:4#config router_ports default add 1-10
Command: config router_ports default add 1-10
Success.
DES-3550:4#
enable igmp_snooping
Purpose Used to enable IGMP snooping on the switch.
Syntax
enable igmp_snooping {forward_mcrouter_only}
Description This command allows you to enable IGMP snooping on the switch. If
forward_mcrouter_only
is specified, the switch will only forward all
multicast traffic to the multicast router, only. Otherwise, the switch
forwards all multicast traffic to any IP router.
Parameters
forward_mcrouter_only − Specifies that the switch should only
forward all multicast traffic to a multicast-enabled router. Otherwise,
the switch will forward all multicast traffic to any IP router.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable IGMP snooping on the switch:
DES-3550:4#enable igmp_snooping
Command: enable igmp_snooping
Success.
DES-3550:4#
disable igmp_snooping
Purpose Used to enable IGMP snooping on the switch.
Syntax
disable igmp_snooping {forward_mcrouter_only}
Description This command disables IGMP snooping on the switch. IGMP
snooping can be disabled only if IP multicast routing is not being
used. Disabling IGMP snooping allows all IGMP and IP multicast
