125
config 802.1x capability ports
all − Specifies all of the ports on the switch.
authenticator − A user must pass the authentication process to gain
access to the network.
none − The port is not controlled by the 802.1x functions.
Restrictions Only administrator-level users can issue this command.
Example usage:
To configure 802.1x capability on ports 1-10 on switch 1:
DES-3550:4#config 802.1x capability ports 1 –10 authenticator
Command: config 802.1x capability ports 1-10 authenticator
Success.
DES-3550:4#
config 802.1x auth_parameter
Purpose Used to configure the 802.1x Authentication parameters on a range
of ports. The default parameter will return all ports in the specified
range to their default 802.1x settings.
Syntax
config 802.1x auth_parameter ports [ <portlist> | all] [default |
{direction [ both | in ] | port_control | force_unauth |auto |
force_auth ] | quiet_period <sec 0-65535> | tx_period <sec 1-
65535> | supp_timeout <sec 1-65535> | server_timeout <sec 1-
65535> | max_req <value 1-10> | reauth_period <sec 1-65535> |
enable_reauth [enable | disable]}]
Description
The
config 802.1x auth_parameter
command is used to configure
the 802.1x Authentication parameters on a range of ports. The
default parameter will return all ports in the specified range to their
default 802.1x settings.
Parameters
<portlist> − Specifies a port or range of ports to be configured.
all − Specifies all of the ports on the switch.
default − Returns all of the ports in the specified range to their
802.1x default settings.
direction [both | in] − Determines whether a controlled port blocks
communication in both the receiving and transmitting directions, or
just the receiving direction.
port_control − Configures the administrative control over the
authentication process for the range of ports.The user has the
following authentication options:
•
force_auth − Forces the Authenticator for the port to
become authorized. Network access is allowed.
