173
show authen_enable
Purpose Used to display the method list of authentication methods for
promoting normal user level priveledges to Administrator level
priveledges on the switch.
Syntax
show authen_enable [default | method_list_name <string 15> |
all]
Description This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to
Adminstrator level privileges.
Parameters default – Entering this parameter will display the default method list
for users attempting to gain access to Administrator level privileges
on the switch.
method_list_name <string 15> Enter an alphanumeric string of up to
15 characters to define the given
method list
the user wishes to
view.
all – Entering this parameter will display all the authentication login
methods currently configured on the switch.
The window will display the following parameters:
Method List Name – The name of a previously configured
method list name.
Priority – Defines which order the method list protocols will
be queried for authentication when a user attempts to log
on to the switch. Priority ranges from 1(highest) to 4
(lowest).
Method Name – Defines which security protocols are
implemeted, per method list name.
Comment – Defines the type of Method.
User-defined
Group
refers to
server groups
defined by the user.
Built-in
Group
refers to the tacacs, xtracacs and tacacs+ security
protocols which are permanently set in the switch.
Keyword
refers to authentication using a technique INSTEAD of
TACACS/XTACACS/TACACS+ which are local
(authentication through the
local_enable
password on the
switch) and none (no authentication necessary to access
any function on the switch).
Restrictions None
Example usage:
To display all method lists for promoting user level privileges to administrator level privileges.
