DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
11
3
Total Entries : 5
enable vlan_trunk
Purpose To enable VLAN trunking on the switch.
Syntax
enable vlan_trunk
Description The enable vlan_trunk command, along with the disable
vlan_trunk command below, is used to enable and disable VLAN
trunking on the Switch, without changing the VLAN trunking
configuration on the ports.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To enable vlan_trunk on the switch:
DGS-3100# enable vlan_trunk
Success.
DGS-3100#
disable vlan_trunk
Purpose To disable VLAN Trunking on the switch.
Syntax
disable vlan_trunk
Description The disable vlan_trunk command, along with the enable
vlan_trunk command below, is used to disable and enable VLAN
Trunking on the Switch, without changing the VLAN Trunking
configuration on the ports.
Parameters None.
Restrictions Only administrator or operator-level users can issue this command.
Example usage:
To disable vlan_trunk on the switch:
DGS-3100# disable vlan_trunk
Success.
DGS-3100#
show vlan_trunk
Purpose To display the current VLAN Trunking configuration on the Switch
Syntax
show vlan_trunk
