DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
13
6
enable 802.1x
Purpose To enable the 802.1x server on the Switch.
Syntax
enable 802.1x
Description The enable 802.1x command enables the 802.1x Port-based
Network Access control server application on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To enable 802.1x switch wide:
DGS3100# enable 802.1x
Success.
DGS3100#
disable 802.1x
Purpose To disable the 802.1x server on the Switch.
Syntax
disable 802.1x
Description The disable 802.1x command disables the 802.1x Port-based
Network Access control server application on the Switch.
Parameters None.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
To disable 802.1x on the Switch:
DGS3100# disable 802.1x
Success.
DGS3100#
config 802.1x
Purpose To configure the 802.1x feap on the Switch.
Syntax
config 802.1x <feap> [enable | disable]
Description The config 802.1x command configure the 802.1x feap on the
Switch.
Parameters <feap> [enable | disable] − enables or disables the 802.1x feap on
the switch.
Restrictions Only Administrator or operator-level users can issue this command.
Example usage:
