A SERVICE OF

logo

Open as PDF
next previous
Operation, cont’d
MTPX Plus Twisted Pair Matrix Switchers • Operation
3-10
Front Panel Operations
The following sections detail the power-up process and then provide sample
procedures for the following actions:
• Creatingties,setsofties,andcongurations
• Changingaconguration
• Viewingties,setsofties,andcongurations
• CreatingI/Ogroups
• Savingapreset
• Recallingapreset
• Mutingandunmutingoutputs
• ViewingandadjustingtheTPinputaudiolevel
• Viewingandadjustingthelocaloutputvolume
• Lockingandunlockingthefrontpanel
• Performingfrontpanelresets
• Togglingbackgroundilluminationonanoff
• Deningtheaudio/RS-232wirepair
• ReadingandsettingtheRS-232/RS-422Remoteportsettings
Definitions
The following terms, which apply to all Extron matrix switchers, are used
throughout this manual:
Tie — An input-to-output connection
Set of ties — An input tied to two or more outputs. (An output can never be tied
to more than one input.)
Configuration — One or more ties or one or more sets of ties
Current configuration — The configuration that is currently active in the
switcher (also called configuration 0)
Global memory preset — A configuration that has been stored. Up to 32 global
memory presets can be stored in memory. Preset locations are assigned
to the input buttons and output buttons. When a preset is retrieved from
memory, it becomes the current configuration.
All 32 global presets can be selected from the front panel for either saving or
retrieving.
Room — A subset of outputs that are logically related to each other, as
determined by the operator. The switchers support up to 10 rooms, each of
whichcanconsistoffrom1to16outputs.
Room memory preset — A configuration consisting of outputs in a single room
that has been stored. When a room preset is retrieved from memory, it
becomes the current configuration.