A SERVICE OF

logo

22
EEC3 System Manual
4.6 Alarm Codes Recording Chart
Pressing the SYNC button will advance from the alarm count to the alarm codes 1 through 16. Record each alarm code by
placing an “X” in the appropriate space on the chart to represent the blinking keypad LEDs. After recording each alarm code
press the SYNC button to cycle to the next alarm code and record.
Once all alarm codes have been recorded, use the Alarm Code Description Chart to record the alarm code description next
to each corresponding alarm above.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
TAKE
#
LEDs SLOW BLINKING LEDs FAST BLINKING
SYNC WARM TROLL TAKE SYNC WARM TROLL
ALARM CODE
DESCRIPTION