FOR YOUR SAFETY
Be sure to confirm that all the air tubes are connected correctly and firmly.
Use the robot in an environment between 0 to 40 degrees centigrade
with a humidity of 20 to 95 percent without condensation.
Failure to do so may result in malfunction. IP Protection Rating is
“IP40.”
Use the robot in an environment where no electric noise is present.
Failure to do so may result in malfunction or defect.
Be sure to secure the movable parts of the robot before transportation.
Failure to do so may result in defect or injury.
Do not bump or jar the machine while it is being transported or installed.
This can cause defects.
Use the machine in an environment where it is not exposed to direct
sunlight.
Failure to do so may result in malfunction or defect.
Be sure to confirm that tools such as the electric screwdriver unit, etc.
are properly connected.
Failure to do so may result in injury or defect.
Be sure to check the wiring to the main unit.
Improper wiring may cause malfunction or defect.
Keep the emergency stop switch within reach of an operator while
teaching and running the robot.
Failure to do so may cause danger since the robot cannot be stopped
immediately and safely.
Be sure to shut off the power supply before plugging the power cord.
Warnings
Features II CARTESIAN Benchtop Robot
vi
