Problem Solving Copy/Print Quality Problems
96
Blank pages Sheets of paper are
sticking together.
Remove the paper stack
from the Paper Tray. Fan
the corners of the stack,
and replace it in the Paper
Tray.
The Low Toner message
is displayed on the Control
Panel.
Go to Replacing the Toner
Cartridges in the
Maintenance section.
The Print/Copy Cartridge is
old or damaged.
Go to Replacing the
Print/Copy Cartridge in the
Maintenance section.
Vertical blanks The Print/Copy Cartridge is
old or damaged.
Go to Replacing the
Print/Copy Cartridge in the
Maintenance section.
Image is slanted The Paper Guides in the
Paper Tray are not in the
appropriate position.
Open the Paper Tray and
adjust the Paper Guides to
the size of the paper. For
more information, go to the
Loading the Paper in the
Paper Tray procedure in
the Setting Up the DP-
C106.
The ADF guides may not
be in the appropriate
positions.
Adjust the ADF guides to
the size of the paper. For
more information, go to the
ADF procedure in the
Accessories section.
The color is too light or too
dark
Color is out of adjustment.
Go to the Adjusting the
Color procedure in this
section.
