Problem Solving 10 Bin Sorter Error Messages
110
Invalid for Stack The selections (such as paper size) you made for the
job are not valid for stacking. Redirect the job to the
Top Tray or change the selections so the job may be
sent for stacking.
Remove papers from High Cap 500 sheets are in the high capacity bin. Remove the
sheets from the high capacity bin and continue
copying.
Remove papers from Sorter The capacity of the Exit Tray (bin 1) or other bins has
been reached. Remove the sheets from the bins and
continue copying.
Sort and Stack are selected.
Load originals in ADF
The 10 Bin Sorter is ready to receive the job. Load
the originals in the ADF and run the job.
Sorter is available up to 10 sets The desired number of sets exceeds the sorting limit.
Decrease the number to 10 and run the remaining
sets as part of another job.
Sorter malfunction A problem has occurred in the Sorter. Examine the
job specifications and any output. Rerun the job, if
possible. If you are unable to proceed, call for
service.
Stack is available up to 30
copies
The capacity of the output bins (30 sheets of 20 lb/
64 gsm paper) has been exceeded. Remove the
paper from the bins and continue running the job.
Stack is full. Remove papers Bin capacity has been reached. Remove the sheets
from the bins and continue copying
Stacker is full Bin capacity has been reached in the high capacity
bin. Remove the sheets from the high capacity bin
and continue copying.
