Problem Solving Network Problem Solving
130
Message Corrective Action/Additional
Information
Print/Copy Cartrdg. type mismatched The Print/Copy Cartridge installed is
not the correct cartridge. Remove the
cartridge and check your
documentation for specifications on the
correct cartridge to install.
Printing . . . This is a normal status message
indicating that printing is in progress.
Ready within 1 minute This is a normal status message. The
Printer is warming up. It will be ready
for printing in a minute.
Run setup and enter correct security
key
This message is displayed if your
model requires that you enter a
security code.
Trying to connect
Please wait . . .
An error may have occurred with the
Printer. Refer to the message panel for
information.
Turn power Off
and On.
Switch Off the Printer power, wait 20
seconds, and then switch On the
power.
Warming Up . . . This is a normal status message. The
print engine is powering up. It will be
ready for printing in a few minutes.
