Filter
Top Products
CMX High Performance Material & Coating Thickness Gauge
27
3.8 XFER (transfer) – Menu
BACKUP SETUPS: Enables the user the ability to backup the setups currently
stored in the CMX to a PC via RS232 port. Refer the help section of the CMX
DakView software for a complete electronic manual.
RESTORE SETUPS: Enables the user the ability to restore the setups currently
saved on a PC to an CMX via RS232 port. Refer the help section of the CMX
DakView software for a complete electronic manual.
ABOUT: Provides the user with Dakota Ultrasonics contact information and the
CMX software version. Refer the Dakota Ultrasonics web site for information on the
latest firmware versions available for download.
3.9 CLR (clear) Key
The primary function of the CLR key is to backspace in an Alpha Edit Box.
3.10 MEAS (measurement mode) Key
The MEAS key puts the CMX into it’s primary mode of operation. In this mode, the
user has a complete view of the LCD.
3.11 OK Key
The primary function of the OK key is confirmation of a change or selection.
3.12 ESC Key
The ESC key is used in the MENU, MEAS, and EDIT functions as a back or escape
function.