Filter
Top Products
Dakota Ultrasonics
88
4) Use the UP and DOWN arrow keys to scroll through the setups until the
target setup is highlighted.
5) Press the ENTER key to activate the confirmation screen.
6) Press the OK key to load the setup from memory.
7) Press the MEAS key to return to the measure screen.
11.3 Saving a Setup
Once the CMX parameters and features have be adjusted for an application, the user
may elect to save these setting to a specific setup location for future use. This can
potentially save time and reduce error between users.
It is sometimes necessary to rename a previously saved setup, or add additional
comments about a particular setup. The setup name may have been entered
incorrectly, or the user needs to use the setup for a completely different project. An
inspector’s name or other comments about the project may also be required for
additional documentation purposes. The following procedures outline the necessary
steps for saving and editing a setup: