Filter
Top Products
Parameter Description
securityType
The setting to specify the security level when
creating the disk groups and all associated virtual
disks.
• none—The disk group and virtual disks are not
secure.
• capable—The disk group and virtual disks are
capable of having security set, but security has
not been enabled.
• enabled—The disk group and virtual disks have
security enabled.
For information about securityType, see
Security Type.
dataAssurance
The setting to specify that a disk pool has data
assurance protection to make sure that the data
maintains its integrity. When you use this
parameter, only protected physical disks can be
used for the disk pool.
These settings are valid:
• none – The disk pool does not have data
assurance protection.
• enabled – The disk pool has data assurance
protection. The disk pool supports protected
information and is formatted with protection
information enabled.
The default value is none.
drawerLossProtect
The setting to enforce drawer loss protection
when you create the replicated repository virtual
disk. To enforce drawer loss protection, set this
parameter to TRUE. The default value is FALSE.
enclosureLossProtect
The setting to enforce enclosure loss protection
when you create the repository. To enforce
enclosure loss protection, set this parameter to
TRUE. The default value is FALSE.
Create RAID Virtual Disk On A Disk Pool
Description
This command creates a new RAID virtual disk on an existing disk pool.
Syntax
create virtualDisk diskPool="diskPoolName" userLabel="virtual diskName"
capacity=virtualDiskCapacity [thinProvisioned=(TRUE | FALSE)] [owner=(0|1)]
[mapping=(none|default)] [dataAssurance=(none|enabled)]
[(existingRepositoryLabel=existingRepositoryName |
[newRepositoryCapacity=newRepositoryCapacityValue (KB | MB | GB | TB | Bytes))]
179