Filter
Top Products
Parameter
Parameter Description
file
The file path and the file name that contains the
NVSRAM values. Enclose the NVSRAM file name in
double quotation marks (" "). For example:
file="C:\Program Files\CLI\dnld
\afrm.dlp"
Valid file names have a .dlp extension.
healthCheckMelOverride
The setting to override the results of the health
check of the major event log (MEL). MEL validation
still occurs, it is not bypassed. If the MEL check
fails, you can bypass the failure by using this
parameter when running the command.
Before any download, the RAID controller module
checks the event log to determine if an event has
occurred that might prevent the new NVSRAM
from successfully downloading. If such an event
has occurred, the RAID controller module normally
does not download new NVSRAM.
This parameter forces the RAID controller module
to download new NVSRAM. The default value is
FALSE. Set this value to TRUE if you want to force
the RAID controller module to download new
NVSRAM.
Enable Disk Group Security
Description
This command converts a non-secure disk group to a secure disk group.
Syntax
enable diskGroup [diskGroupName] security
Parameter
Parameter Description
diskGroup
The alphanumeric identifier (including - and _) of
the disk group that you want to place in the
Security Enabled state. Enclose the disk group
identifier in square brackets ([ ]).
225