Dell 34XX Marine Radio User Manual


 
Syntax
set snmpCommunity communityName="snmpCommunityName"
newCommunityName="newSnmpCommunityName"
Parameters
Parameter Description
communityName
The name of the existing SNMP community that
you want to rename. Enclose the SNMP
community name in double quotation marks (" ").
newCommunityName
The new name that you want to give to the SNMP
community. Enclose the SNMP community name
in double quotation marks (" ").
Update SNMP MIB II System Group Variables
Description
This command changes the system variables for the Simple Network Management Protocol (SNMP). The
system variables are maintained in a Management Information Base II (MIB-II) database. The system
variables are:
Name of the system
Name of the system contact
Location of the system
Syntax
set snmpSystemVariables
sysName=newSystemName
sysContact=contactName
sysLocation=systemLocation
Parameters
Parameter Description
sysName
The new name that you want to give to the SNMP
system. Use standard SNMP and MIB conventions
for the system name. Enclose the SNMP system
name in square brackets([ ]).
sysContact
The name of contact person for the managed
system, with information on how to contact this
person. Enclose the SNMP contact name in square
brackets([ ]).
412