Filter
Top Products
Parameter Description
warningThresholdPercent
Specifies how full to allow the snapshot repository
virtual disk to get before sending a warning that
the snapshot repository virtual disk is close to
capacity. The warning value is a percentage of the
total capacity of the snapshot repository virtual
disk. The default value is 50, which represents
50 percent of total capacity. (Change this value
using the set snapshotVirtualDisk
command.)
repositoryPercentOfSource
Specifies the size of the snapshot repository virtual
disk as a percentage of the source virtual disk size.
The default value is 20, which represents 20
percent of the source virtual disk size.
repositoryFullPolicy
Specifies how snapshot processing continues if the
snapshot repository virtual disk is full. You can
choose to fail writes to the source virtual disk
(failSourceWrites) or fail writes to the snapshot
virtual disk (failSnapShot). The default value is
failSnapShot.
enableSchedule
Turns on or off the ability to schedule a snapshot
operation. To turn on snapshot scheduling, set the
parameter to TRUE. To turn off snapshot
scheduling, set the parameter to FALSE. Schedules
a snapshot operation of the following type:
• immediate
• startDate
• scheduleDay
• startTime
• scheduleInterval
• endDate
• noEndDate
• timesPerDay
• timeZone
The following example of the create sourceVirtualDisk command includes user‑defined
parameters:
client>smcli 123.45.67.89 -c "create
snapshotVirtualDisk sourceVirtualDisk=
\"Mars_Spirit_4\" repositoryRAIDLevel=5
repositoryPhysicalDiskCount=5 physicalDiskType=
SAS userLabel=\"Mars_Spirit_4_snap1\"
repositoryUserLabel=\"Mars_Spirit_4_rep1\"
warningThresholdPercent=75
repositoryPercentOfSource=40
repositoryFullPolicy=
failSnapShot;"enableSchedule=TRUE schedule=
(immediate | snapshotSchedule)]
74