Dell R730 Life Jacket User Manual


 
Power indicator pattern Condition
Slow blink Quick Sync is waiting to be configured from iDRAC.
Solid Quick Sync is ready to transfer.
Blinks three times rapidly and then turns off Quick Sync feature is disabled from iDRAC.
Blinks continuously when the mobile device
touches the antenna
Indicates data transfer activity.
Blinks rapidly five times and turns off for one
second when the activation button is pressed.
This pattern is repeated until the activation
button is pressed again.
Quick Sync hardware is not responding properly.
Reseat the bezel. the problem persists, see Getting
help.
Off Indicates that the Quick Sync feature is turned off.
Use the activation button to activate it. If pressing the
activation button does not turn on the LEDs, it
indicates that power is not delivered to the Quick
Sync bezel.
NOTE: For security purposes, Quick Sync turns
off after thirty seconds of in-activity after the
activation button is pressed. Once timed-out,
the user is expected to press the activation
button again to activate Quick Sync.
Back-panel features and indicators
Figure 11. Back-panel features and indicators—PowerEdge R730
23