Filter
Top Products
Quick Installation Guide
00825-0100-4801, Rev KB
December 2010
Rosemount 3051S
11
STEP 4 CONTINUED...
Intrinsic Safety Consideration: The transmitter assembly with remote display has been
approved with Belden 3084A DeviceNet cable. Alternate cable may be used as long as the
transmitter with remote display and cable is configured according to the installation control
drawing or certificate. Refer to appropriate approval certificate or control drawing in Appendix B
of the 3051S reference manual for remote cable IS requirements.
IMPORTANT
Do not apply power to the remote communications terminal. Follow wiring instructions carefully
to prevent damage to system components.
Figure 8. Remote Mount Display wiring diagram
Junction Box Housing Remote Mount Display
4-20 mA
(white) 24 AWG
(blue) 24 AWG
(black) 22 AWG
(red) 22 AWG
4801_QIG_RevKB.fm Page 11 Friday, December 3, 2010 1:17 AM