Filter
Top Products
Quick Installation Guide
00825-0100-4801, Rev KB
December 2010
Rosemount 3051S
22
PRODUCT CERTIFICATIONS
Approved Manufacturing Locations
Rosemount Inc. — Chanhassen, Minnesota USA
Fisher-Rosemount GmbH & Co. — Wessling, Germany
Emerson Process Management Asia Pacific Private Limited — Singapore
Beijing Rosemount Far East Instrument Co., LTD — Beijing, China
Emerson Process Management LTDA — Sorocaba, Brazil
Emerson Process Management (India) Pvt. Ltd. — Daman, India
European Directive Information
The EC declaration of conformity can be found on page 29. The most recent revision can be found at
www.rosemount.com.
Ordinary Location Certification for FM Approvals
As standard, the transmitter has been examined and tested to determine that the design meets basic
electrical, mechanical, and fire protection requirements by FM Approvals, a nationally recognized
testing laboratory (NRTL) as accredited by the Federal Occupational Safety and Health Administration
(OSHA).
Hazardous Locations Certifications
North American Certifications
FM Approvals
E5 Explosion proof for Class I, Division 1, Groups B, C, and D, T5 (T
a
= 85 °C); dust-ignition
proof for Class II and Class III, Division 1, Groups E, F, and G, T5 (T
a
= 85 °C); hazardous
locations; enclosure Type 4X, conduit seal not required when installed according to
Rosemount drawing 03151-1003.
I5 Intrinsically Safe for use in Class I, Division 1, Groups A, B, C, and D, T4 (T
a
= 70 °C);
Class II, Division 1, Groups E, F, and G; Class III, Division 1; Class I, Zone 0 AEx ia IIC T4
(T
a
= 70 °C) when connected in accordance with Rosemount drawing 03151-1006;
Non-incendive for Class I, Division 2, Groups A, B, C, and D; T4 (T
a
= 70 °C); Enclosure
Type 4X
For entity parameters see control drawing 03151-1006.
Canadian Standards Association (CSA)
All CSA hazardous approved transmitters are certified per ANSI/ISA 12.27.01-2003.
E6 Explosion-Proof for Class I, Division 1, Groups B, C, and D; Dust-Ignition-Proof for Class II
and Class III, Division 1, Groups E, F, and G; suitable for Class I, Division 2, Groups A, B,
C, and D, when installed per Rosemount drawing 03151-1013, CSA Enclosure Type 4X;
conduit seal not required; Dual Seal.
I6 Intrinsically Safe for Class I, Division 1, Groups A, B, C, and D when connected in
accordance with Rosemount drawings 03151-1016; Dual Seal.
For entity parameters see control drawing 03151-1016.
4801_QIG_RevKB.fm Page 22 Friday, December 3, 2010 1:17 AM