Filter
Top Products
12
Connect the Scanner to Your Computer
If you are connecting to a PC, Windows 98 must be factory preinstalled on your
system.
1. Make sure the scanner, computer, and any USB devices connected to your
computer are turned off. The scanner is off when the
Poperate button is out
(not pushed down below the surface of the front panel).
2. Locate the USB cable that came with your scanner.
3. Plug the square connector on the USB cable into the USB connector
on the back of the scanner. Then plug the flat connector into the USB
port on your computer or USB hub.
Your system may not work correctly if you use a USB cable
other than the one supplied by EPSON or if you connect your
scanner through more than one hub.
4. Plug in the power cables for your computer, scanner, and other USB devices.
operate button