Fujitsu M5000 Life Jacket User Manual


 
setroute(8)
System Administration 215
OPERANDS The following operand is supported:
EXTENDED
DESCRIPTION
If the specified address is the same as the DSCP address, an error occurs.
For XSCF-LAN#0 and XSCF-LAN#1, do not set the routing to the same network
or the same host.
To reflect the routing information to XSCF, execute the applynetwork(8)
command. After reflected the information, use the rebootxscf(8) command to
reset XSCF to complete the setting.
The showroute(8) command can display the current routing information that is
set for the XSCF network.
EXAMPLES
EXAMPLE 1 Adds the routing of destination 192.168.1.0 and netmask 255.255.255.0 for
XSCF-LAN#0 on XSCF unit 0.
EXAMPLE 2 Adds the routing of destination 192.168.1.0 and gateway 192.168.1.1 for
interface Specifies the network interface to be set with routing
information. One of the following values can be specified:
For midrange server:
For XSCF unit 0:
xscf#0-lan#0 XSCF-LAN#0
xscf#0-lan#1 XSCF-LAN#1
For abbreviation:
lan#0 XSCF-LAN#0
lan#1 XSCF-LAN#1
For high-end server:
For XSCF unit 0:
xscf#0-lan#0 XSCF-LAN#0
xscf#0-lan#1 XSCF-LAN#1
For XSCF unit 1 (when a duplicated configuration is used):
xscf#1-lan#0 XSCF-LAN#0
xscf#1-lan#1 XSCF-LAN#1
XSCF> setroute -c add -n 192.168.1.0 -m 255.255.255.0 xscf#0-lan#0