Filter
Top Products
Intro(8)
Intro 3
man display manual pages of specified XSCF shell command
moveboard move an eXtended System Board (XSB) from the current
domain to another
nslookup refer to the DNS server for the host
password manage user passwords and expiration settings
poweroff turn off the power to the specified domain
poweron turn on the power to the specified domain
prtfru display FRUID data on the system and External I/O
Expansion Unit
rebootxscf reset the XSCF
replacefru replace a Field Replaceable Unit (FRU)
reset reset the specified domain
resetdateoffset reset the time subtraction between XSCF and the domain.
sendbreak send a break signal to the specified domain
setaltitude set the altitude of the system or whether or not the air filter
installed
setarchiving configure the log archiving functionality
setaudit manage the system auditing functionality
setautologout set the session timeout time of the XSCF shell
setcod set up the Capacity on Demand (COD) resources used for
domains
setdate set the date and time of XSCF
setdcl set a domain component list (DCL)
setdomainmode set a domain mode
setdomparam forcibly rewrite OpenBoot PROM environment variables
setdscp set the IP address assignments for the Domain to Service
Processor Communications Protocol (DSCP)
setdualpowerfeed set dual power feed mode
setemailreport set up the email report configuration data
sethostname set a host name and domain name for an XSCF unit
sethttps start or stop the HTTPS service, which is used in the XSCF
network. This command also performs authentication-
related settings.