Fujitsu M5000 Life Jacket User Manual


 
flashupdate(8)
52 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007
EXTENDED
DESCRIPTION
When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.
When the firmware is updated, the XSCF unit is reset. Therefore, LAN
connection to the XSCF is canceled if already established.
When there's a faulty FRU, can't update the firmware. Resolve the FRU fault
then update.
EXAMPLES
EXAMPLE 1 Check whether the entire firmware can be updated to version 1020.
EXAMPLE 2 Updates the entire firmware to version from 1010 to 1020.
-q Suppresses all messages to stdout, including prompts.
-s version Specifies a XCP comprehensive firmware version. For version,
specify a major version, minor version and micro version
continuously.
The XCP version number appears as xyyz by four digits, where:
x Major firmware release number
yy Minor release number
z Micro release number
-y Automatically answers 'y' (yes) to all prompts.
XSCF> flashupdate -c check -m xcp -s 1020
XSCF> flashupdate -c update -m xcp -s 1020
The XSCF will be reset. Continue? [y|n] :y
XCP update is started (XCP version=1020:last version=1010)
OpenBoot PROM update is started
OpenBoot PROM update has been completed (OpenBoot PROM version=01010001)
XSCF update is started (SCF=0, bank=1, XCP version=1020:last version=1010)
XSCF download is started (SCF=0, bank=1, XCP version=1020:last
version=1010, Firmware Element ID=00:version=01010002:last
version=01010001)
XSCF download has been completed (SCF=0, bank=1, XCP version=1020:last
version=1010, Firmware Element ID=00:version=01010002:last
version=01010001)