Filter
Top Products
3. SETTING AND ADJUSTMENT
3-45
Parameters for LAN adapter EC-1010
Set parameters for LAN adapter as follows.
Unit Type command
First LAN adapter
of chart processor
sercotr /d=2 /p=15001 /r=15000 /f=1 /n=8 /m=0 /e0=10.0.0.184
/e1=0.0.0.0
Second LAN adapter
of chart processor
sercotr /d=3 /p=15001 /r=15000 /f=9 /n=8 /m=0 /e0=10.0.0.184
/e1=0.0.0.0
a) For example, type the command for First LAN adapter. (Note! IP address for first Chart
Radar e0=10.0.0.184)
b) Then type the command: sercotr /e2=0.0.0.0 /e3=0.0.0.0 e4=0.0.0.0 (in common with
First and Second)
Parameter Meaning Setting
d device number
2: First LAN adapter of chart processor
3: Second LAN adapter of chart processor
p LAN adapter port 15001: mandatory port number
r radar port 15000: mandatory port number
f number of first serial port
1: first LAN adapter
9: second LAN adapter
n number of serial channels 8: mandatory number of serial channels
m operating mode
0: normal operation mode
1: debug mode
e0 IP address of first client 10.0.0.184/10.0.0.185
e1 - e4 IP address of another client 0.0.0.0